CyberPower Systems PowerPanel Power Supply System - Manual (Page 18)

PowerPanel ® Business Edition
Copyright © 2006-2007 Cyber Power Systems, Inc. All rights reserved. 17
CONFIGURE ACTION SETTINGS FOR DIFFERENT EVENTS
• Configure Settings of Event Actions for Selected Events from the Event List.
• Configure Settings of Event Actions in the Event List in Quick Setting Mode.
• Configure Overall Action Settings.
Configure Settings of Event Actions for Selected
Events
The Event Settings page displays a table listing all power events and separates
them into three categories Information, Warning and Severe. This table shows
the actions defined for each power event. The Event Setting page provides an
interface that you can set actions for the selected event. It also includes a
description and allows you to set the following:
• Logging: Records this power event.
• Notification: Sends a notification when this event occurs.
• E-mail: Sends an e-mail when this event occurs.
• Command File: Executes a command file when this event occurs.
• Shutdown: Initiates a shutdown sequence when this event occurs.
Overview event list
[for Agent]
Name Description
Severe
Battery capacity is
critically low Battery capacity is critically low; the power could be lost
immediately.
Battery Backup is
faulty Battery Backup malfunction, it could not work normally.
Communication lost
in power problem Communication with device has been lost when meets a
power condition.
Warning
Utility power failure Utility power failure, battery power will be supplied.
Output is
overloaded Output is overloaded; power may no longer be supplied.
You can set the threshold of output load in page Battery
Backup → Configuration → System.
Bypass is Output is overloaded in bypass mode.