CyberPower Systems PowerPanel Power Supply System - Manual (Page 21)

PowerPanel ® Business Edition
Copyright © 2006-2007 Cyber Power Systems, Inc. All rights reserved. 20
Output is no longer
overloaded Output is normal and no longer overloaded.
Bypass is no longer
overloaded Output is no longer overloaded in bypass mode.
Batteries have
installed The batteries have been installed, device can be used
normally.
Remaining runtime
is sufficient Remaining runtime is sufficient to discharge. This event
will occur when event "Remaining runtime is insufficient"
is solved.
Communication
resume Communication with device has resumed.
Communication
established Communication established at startup.
Battery Backup
monitored The Battery Backup will start to be monitored.
Battery Backup
monitoring stopped The Battery Backup monitoring stopped. This event is
only can be set in Logging action.
Overview event list
[for Slave]
Name Description
Severe
Shutdown asked by Agent Agent asks for shutdown. There may be
some problem in Power System.
Warning
Communication can't establish
with Agent The communication with Agent has been
lost.
Communication lost with Agent
in power problem The communication with Agent has been lost
after power problem occurred.
Information
Communication established
with Agent Communication with Agent is established.
Configure Settings of Event Actions in Quick Setting Mode