CyberPower Systems PowerPanel Power Supply System - Manual (Page 23)

PowerPanel ® Business Edition
Copyright © 2006-2007 Cyber Power Systems, Inc. All rights reserved. 22
receivers which are not belong to local users, those notification
receivers will not receive the notification.
• E-mail:
o
Send an e-mail when this event occurs: If you enable this option,
users configured as E-mail Receivers will receive an e-mail when the
event occurs.
ƒ
Send an e-mail after this event has occurred for a specific
time: Sets the time delay before sending e-mail. (0 means
immediately)
ƒ
Send an e-mail repeatedly when this event occurs: If you
enable this option, the e-mail will be sent repeatedly according
to repeat rate.
ƒ
The rate at which e-mail will repeat: Sets the repeat
rate to send e-mail.
Note: Remember to configure E-mail settings to make sure sending email is
available.
• Command File:
o
Execute a command file when this event occurs: If you enable
this option, the selected command file will execute when this event
occurs. If you have selected a command file which does not exist right
now, system will show a note to notify this.
o
Execute a command file after this event has occurred for a
specific time: Sets the delay time to execute the command file. (0
means immediately)
o
Command execution will repeat when this event occurs: If you
enable this option, command file will execute repeatedly according to
the repeat rate.
ƒ
The rate at which command execution will repeat: Sets
the repeat rate to execute the command file.
ƒ
Select command file: Sets which command file you want to
execute when the event occurs. You can write some shell script
in this command file. Command files must be saved in the
"extcmd" directory which is in the PowerPanel Business Edition
installation directory. The system will search that directory and
check if there are supported file types. If there are supported
file types, those files will be shown in the command file list box.
The current supported file type are *.bat and *.cmd files ("bat"
extension file is supported on Win95, Win98, and WinMe. "cmd"
extension file is supported on WinNT, Win2000, WinXP, and
Win2003.)
ƒ
The approximate uptime for the selected file to complete:
Sets the estimated execution time of that command file. This
time is used by the Battery Backup to delay shutdown or
hibernation.