Comtrol RocketPort Windows 98 - Manual (Page 20)

20 Installing the New Driver
Windows 95/98
8. Select the Comtrol product you are installing and click Next. The
Add New Hardware Wizard selects an I/O address and IRQ
setting. Make note of these values, as you may need to change them.
9. Click Next. The system copies the driver files and rebuilds the
driver database.
10. Click Finish. The following message displays:
11. If the I/O address and interrupt selected by the system in Step 8
match those you plan to use when installing the hardware, click
Yes to shut down your computer and skip to Step 12.
If the I/O address or interrupt selected in Step 8 do not match those
you plan to use, click No, then follow these additional steps:
a. Access the System Properties window. (Either double-click on
the Control Panel System icon, or right-click on the My
Computer icon and select Properties.)
b. Select the Device Manager tab.