Configuring port properties, Access the main setup tab, Adding additional adapters – Comtrol Multiport Modems Windows 2000 User Manual
Page 20
Driver and Adapter Information
20
Configuring Port Properties
Configuring Port Properties
You can also configure specific port properties for this adapter:
•
Override and lock baud rate to ...
•
Timeout on transmit data on port close
•
Map CD to DSR
•
Map 2 stop bits to 1
•
Wait on physical transmission before completing write
•
Emulate modem hardware RING signal
•
Clone all Comtrol ports for this system
Use the following procedure to access the Port Properties tab:
1.
2.
Highlight the port you want to configure and select the Properties button.
3.
Enable the features you want to use and select the OK button. To configure all
ports on the adapter with the same features, select the Clone check box.
Note: Select the Help button if you need detailed information about
procedures or use context-sensitive help for any field.
Adding Additional Adapters
Install the adapter and configure the ports.
Note: This driver supports only one ISA adapter.