Configuring device properties, Access the main setup tab, Select the options tab – Comtrol Multiport Modems Windows 2000 User Manual
Page 19: Enable the features you want to use
Driver and Adapter Information
19
Configuring Device Properties
Configuring Device Properties
You can optionally configure the following Device Properties:
•
Verbose event log for diagnostic purposes.
•
Scan rate to adjust latency for timing-critical applications.
•
Enable RS-485 mode.
To set the previous options, use the following procedure:
1.
2.
Select the Options tab.
3.
Enable the features you want to use.
4.
If you enable the RS-485 feature, an RS485 tab appears behind the Port Setup
tab that you may need to configure.
Note: Select the Help button if you need detailed information about
procedures or use context-sensitive help for any field.