Access the main setup screen, Highlight the device name and select properties – Comtrol RPSH Windows 2000 User Manual
Page 10
Changing Device Properties or Setting Up Backup Servers
10
Changing Device Properties or Setting Up Backup Servers
You can change the following device properties:
•
Device name
•
Starting COM port number.
In addition, you can configure primary and back up servers and establish a time out period.
To change device properties or set up a backup server, follow this procedure to access the Device Setup tab:
1.
2.
Highlight the device name and select
Properties.
3.
After making your changes, select the Ok
button and follow any other driver
prompts.
Note: Use the Help button if you need
detailed information about
procedures or use context-sensitive
help for any field.