File systems, Pcmcia/usb package supported, Ethernet cards – Comtrol DM ATS-LNX User Manual

Page 45

Appendix B. Specifications and Notices

File Systems

CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m

#
# USB Miscellaneous drivers

#
# Bluetooth support
#

#
# Kernel hacking
#

File Systems

This is the list of how the file systems are configured and mounted:

/dev/hdd1 on / type ext3 (rw,errors=remount-ro)

proc on /proc type proc (rw)

devpts on /dev/pts type devpts (rw,gid=5,mode=620)

tmpfs on /dev/shm type tmpfs (rw,size=32m)

/dev/shm/tmp on /tmp type none (rw,bind)

/dev/shm/var/log on /var/log type none (rw,bind)

/dev/shm/var/run on /var/run type none (rw,bind)

/dev/shm/var/lock on /var/lock type none (rw,bind)

usbdevfs on /proc/bus/usb type usbdevfs (rw)

PCMCIA/USB Package Supported

The pcmcia-cs-3.1.33 package is installed and configured on the ATS-LNX. If the
PCMCIA device that you want to use is not included on the supported device list,
you can download and install a new version. There are many web sites from which
you can download the latest version, including:

http://pcmcia-cs.sourceforge.net/

The following lists are copyrighted material downloaded from the Linux PCMCIA
Supported Device List provided by David Hinds located at

http://pcmcia-

cs.sourceforge.net/ftp/SUPPORTED.CARDS

. The following PCMCIA cards are

known to work in at least one actual system. Comtrol does not provide support of
this package.

Note: For a list of supported USB devices, see

http://www.linux-usb.org/

devices.html

For installation and configuration information, you can see:

http://www.tldp.org/

HOWTO/Wireless-HOWTO.html