Select the ethernet board and press enter. the, Move the highlight to protocol, enter aiovs1, a, At frame type, press enter to display the list – Comtrol VS1100 Novell NetWare User Manual
Page 31: Press esc to close this window. you are asked i, Repeat these steps to configure other bindings

NIAS/MPR Installation and Configuration
31
Novell NetWare
The list of configured boards is displayed:
5.
Select the Ethernet board and press Enter. The Binding A
Miscellaneous Protocol to an Interface window displays:
6.
Move the highlight to Protocol, enter AIOVS1, and press Enter.
7.
At Frame Type, press Enter to display the list of valid frame types.
Select Ethernet_II and press Enter.
8.
Press Esc to close this window. You are asked if you want to save
your changes. Select Yes and press Enter.
9.
Repeat these steps to configure other bindings as needed. When
done, press Esc to return to the Internetworking Configuration
menu.
This manual is related to the following products: