From the internetworking configuration menu, se, Select the first port to configure and press en, Select ppp and press enter – Comtrol VS1100 Novell NetWare User Manual
Page 27: Configuring network interfaces
NIAS/MPR Installation and Configuration
27
Novell NetWare
Configuring Network Interfaces
Follow these steps to configure each port:
1.
From the Internetworking Configuration menu, select Network
Interfaces.
The Network Interfaces status window displays:
Each line is a port on your VS1000. At this point the status of each
port should be “unconfigured.”
2.
Select the first port to configure and press Enter.
For example, if you named the board VS1000-1, the first port is
VS1000-1_01.
You are asked to select a medium.
3.
Select PPP and press Enter.
The PPP Network Interface Configuration window is displayed:
This manual is related to the following products: