At the server console, enter load inetcfg, Select boards, Nias/mpr installation and configuration – Comtrol VS1100 Novell NetWare User Manual
Page 22
22
NIAS/MPR Installation and Configuration
Novell NetWare
NIAS/MPR Installation and Configuration
The following procedures describe how to configure NetWare Internet
Access Server/MultiProtocol Router™ (NIAS/MPR) to work with the
VS1000. This discussion presumes you have already completed the
steps under “Before You Begin,” earlier in this section.
Note: NetWare Connect installation requires that you manually load
the driver and bind the protocol before beginning configuration.
In contrast, when working with NIAS/MPR, the driver must
not be loaded or bound before beginning. If necessary, down and
restart the server to make sure that the driver is not loaded.
1.
At the server console, enter load inetcfg
The Internetworking Configuration menu is displayed:
2.
Select Boards.
The list of configured boards is displayed: