beautypg.com

License plate lamp – Chrysler 2015 200 - Owner Manual User Manual

Page 648

background image

NOTE:

It may be necessary to use significant force to

remove the two out bored ball studs from the socket

fasteners to remove the tail lamp housing.
5. Rotate the stop/rear turn signal lamp socket 1/4 turn

counterclockwise and remove it from the tail lamp

housing.

6. Remove the bulb from the socket and install the

replacement bulb.

7. Install the bulb socket into the tail lamp housing and

rotate the bulb socket ¼ turn clockwise to lock it in

place.

8. Install the tail lamp housing.
9. Install the tail lamp housing beauty cover.

License Plate Lamp

1. Remove the screw of the license plate lamp assembly

and pull down on the license plate lamp assembly to

remove.

2. Remove the bulb from the socket and install the

replacement bulb.

3. Install the license plate lamp assembly.

646 MAINTAINING YOUR VEHICLE