beautypg.com

Brake assist system (bas) – Chrysler 2015 200 - Owner Manual User Manual

Page 478

background image

WARNING!

Many factors, such as vehicle loading, road condi-
tions, and driving conditions, influence the chance
that wheel lift or rollover may occur. ERM cannot
prevent all wheel lift or rollovers, especially those
that involve leaving the roadway or striking objects
or other vehicles. The capabilities of an ERM-
equipped vehicle must never be exploited in a reck-
less or dangerous manner, which could jeopardize
the user’s safety or the safety of others.

Brake Assist System (BAS)

The BAS is designed to optimize the vehicle’s braking

capability during emergency braking maneuvers. The

system detects an emergency braking situation by sens-

ing the rate and amount of brake application and then

applies optimum pressure to the brakes. This can help

reduce braking distances. The BAS complements the

Anti-Lock Brake System (ABS). Applying the brakes very

quickly results in the best BAS assistance. To receive the

benefit of the system, you must apply continuous brak-

ing pressure during the stopping sequence. Do not

reduce brake pedal pressure unless braking is no longer

desired. Once the brake pedal is released, the BAS is

deactivated.

WARNING!

The BAS cannot prevent the natural laws of phys-

ics from acting on the vehicle, nor can it increase
braking efficiency beyond that afforded by the
condition of the vehicle brakes and tires or the
traction afforded.

The BAS cannot prevent collisions, including those

resulting from excessive speed in turns, following
another vehicle too closely, or hydroplaning.

(Continued)

476 STARTING AND OPERATING