beautypg.com

Brake system, Brake master cylinder – Chrysler 2015 200 - Owner Manual User Manual

Page 609

background image

• Do not change the thermostat for Summer or Winter

operation. If replacement is ever necessary, install

ONLY the correct type thermostat. Other designs may

result in unsatisfactory engine coolant (antifreeze)

performance, poor gas mileage, and increased emis-

sions.

Brake System

In order to assure brake system performance, all brake

system components should be inspected periodically.

Refer to the “Maintenance Schedule” for the proper

maintenance intervals.

WARNING!

Riding the brakes can lead to brake failure and
possibly a collision. Driving with your foot resting or
riding on the brake pedal can result in abnormally

(Continued)

WARNING!

(Continued)

high brake temperatures, excessive lining wear, and
possible brake damage. You would not have your full
braking capacity in an emergency.

Brake Master Cylinder
The fluid in the master cylinder should be checked when

performing under hood services or immediately if the

“Brake Warning Light” is illuminated.
Be sure to clean the top of the master cylinder area before

removing the cap. If necessary, add fluid to bring the

fluid level up to the requirements described on the brake

fluid reservoir. With disc brakes, fluid level can be

expected to fall as the brake pads wear. Brake fluid level

should be checked when pads are replaced. However,

low fluid level may be caused by a leak and a checkup

may be needed.

7

MAINTAINING YOUR VEHICLE 607