Display, Numeric display, Message descriptors – Toshiba MA-141 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
DISPLAY
The front display is located at the top of the register just above the
keyboard. The display has two types of display — numeric display and message
descriptors.
Front Display
Numeric Display
AMOUNT {8 digits) Displays the numeric data, such as amount, quantity,
etc.
DPT (2 digits)
RPT (1 digit)
Dispalys the code which represents each Department Key.
It stays lit when repeating the same department entry.
Displays the repeat department entry count.
PLU (3 digits, commonly used with the DPT and RPT digits)
Displays the PLU code when any PLU is entered. It goes
out when repeating the same PLU entry.
Message Descriptors
SLIP
Lights up when a slip has been properly inserted to allow
validation.
It flashes to require a slip insertion when validation
compulsion is programmed on a transaction key.
ALM
Lights up with the alarm buzzer to indicate that the last
operation or numeric entry has resulted in an error. To clear
the erroneous condition, depress the key.