Toshiba TEC MA-1040-400 Series - Manual (Page 59)

WHEN A POWER FAILURE OCCURS ...
If a power failure occurs, all sales totals stored in the memories are
automatically protected by the battery installed in the ECR. The battery is
rechargeable and it is recharged when the AC power returns. As the power
returns, the register revives to continue the work and displays the last item
entered before the power failure- However, please note the following
phenomena to occur on the register when the power is regained:
1, The printer will work to print the entered data without failure after
the power recovery, if any data was being printed. However, one extra
line may be fed on the power recovery depending on the power recovery
timing.
2. The following are the display indications on the power recovery.
ECR CONDITION at the time of
POWER FAILURE
DISPLAY INDICATION on the POWER RECOVERY
OUTSIDE
A SALE
No key-in has been
operated.
"0" display
Numeric or Declara­
tion keys have been
entered but no
motorized keys-
Same as above.
DURING
A SALE
No Numeric or
Declaration keys
have been entered.
Regains the display content that was
obtained just before the power failure.
Numeric or Declara­
tion keys have been
entered.
Same as above.
In the event of a power failure, it is suggested to check the receipt print
content before the receipt is handed to the customer.
SPECIFICATIONS
size ............................ 460mm(width) x 400mm(depth) x 360mm(height)
Weight .......................... 16.5kg
Power Required .................. AC lOOV, llOV, 117V, 220V, 240V 50/60HZ
(varies depending on the destination.)
Power Consumed .................. 0.4A at 117V (30W)
Ambient Temperature .... ......... 0°C to 40°C, lOZ to 90% Relative Humidity
Size of Rceipt and Journal Tape .. 45mm(width) x 80mm(diameter)
- 55 -