Toshiba TEC MA-1040-400 Series User Manual
Page 36
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VALIDATION PRINT
After entering the
required item thorugh
a transaction key or
media key.
Insert 4 validation
slip into the vali
dation slot. Make
sure that the "SLP"
lamp is steadily lit
[VALIDATE]
follow until
printed is
NOTES: 1. No other operations can
the validation slip once
withdrawn.
2. If the "SLP" lamp flickers during
registrations, it indicates that the
last item just registered has been
programmed
to
require
validation
print.
In
this
case,
no
other
operations
can
follow
until
the
validation print of the item is
executed.
3. The following are the programmable
selections relating to validation:
(1) PRINT FORMAT
a) Date Print/Non-print
b) Consecutive No. Print/Non-
(2) MULTI- or SINGLE-VALIDATION
(Number of times of validation
print allowed for the same item)
(3) VALIDATION COMPULSORY status on
the following keys:
[AT/TL], [CHK TND], [Chg],
[RTN MDSE], [DOLL DISC], [%-],
[VND CPN], [STR CPN], [ITEM CORR],
[VOID], [FSTL TEND], Negative
Depar tment s/PLU s
4. As printing occurs on the bottom side
of the paper, please certain to
insert the slip into the validation
slot with the printing side downward.
- 32 -