Toshiba TEC MA-1040-400 Series - Manual (Page 31)

the starting) but it must be depressed before the final key of each
sequence.
Designated Line Voiding is also possible for a Department or PLU item
plus %+ or X- item sequences, if [VOID] is depressed at least before the
[DEPT] key (for Department Entry), [PLU] (for Preset PLU Entry), or [AMT]
(for Open PLU Entry).
NOTE: The [IC/VD] key will function the same as the [VOID] key except
that:
1) [VOID] may be depressed before or after a numeric entry if
depressed before the motorized key (key to cause the line
item print), however,
2) [IC/VD] should only be depressed after a numeric entry. If
depressed at the top without a prior numeric entry, it may
item-correct the last item just entered. In voiding a preset
department entry, for example, the quantity must be entered
first (if an ordinary entry, the quanity will be "1"), next
depress [IC/VD], and then the [Preset DEPT] key.
EXAMPLES OF DESIGNATED LINE VOIDING USING [IC/VD]
hj ♦ [IC/VD] + [Preset DEPT] ---
Quantity "1" of multiplication
I
PRICE TO BE VOIDED
I
^ [IC/VD]
+
[Open DEPT]
+
---
[preset PLU Code! * [IC/VD] [PLU] ---
[Open PLU Code
I +
[IC/VD] -► [PLU]
I
PRICE TO BE VOIDED
I
[AMT] ---
NON-ADD NUMBER PRINT
(-- 4 ) [ number . 8 digits maximum! [#] (or [#/NS]) » -----
CHECK CASHING (Allowed only outside a sale)
[ amount of CHECK TO BE CASHED j [CHK TND]
... The drawer opens and a receipt is issued.
Receive the check and pay the amount in cash to
the customer,
NOTES: 1. Check cashing may be programmed to be prohibited.
2. The [Chg] key may also be operated for cashing if so
programmed.
- 27 -