Toshiba TEC MA-1040-400 Series - Manual (Page 14)

Usually, non-add numbers may be entered as many times as required
within a sale. However, it is programmable to prohibit more than
one non-add number entry within a sale.
When the Mode Lock is in the X position, this key is used to read the
Cash-in-drawer Total memory.
NS
NO-SALE KEY ([NS])
This key is used, when the Mode Lock is in the REG or MGR position, to
open the cash drawer while the machine is outside a sale. This
operation is used to give changes (exchange bills into coins) or to
check the receipt and journal print condition.
Usually, a non-add number may be entered prior to a no-sale operation
within a receipt. However, it can be programmed to prohibit a non-add
number entry when a no-sale is operated.
#/NS
FLU
NON-ADD HUMBER PRINT / NO-SALE KEY (l#/NSl)
This is a dual-function key.
NON-ADD NUMBER PRINT FUNCTION (same as [#] on page 9)
When the Mode Lock is in the REG, MGR, or Q , and a number is
entered before depressing this key, this key functions as NON-ADD
NUMBER PRINT key.
This key also functions to read the Cash-in-drawer Total memory when
the key is simply depressed while the Mode Lock is in the X
position.
NO-SALE FUNCTION (same as [NS] above on this page)
When the Mode Lock is in the REG, MGR, or [^, and the key is simply
depressed without any prior numeric entry, this key functions as
NO-SALE key.
NOTE: This key will always function the same as the [#] key when the
Mode Lock is in the SET position.
PLU (Price-Look-Up) KEY ([PLU])
This key is used to enter a PLU that is linked to a department. Each
PLU can be programmed to be preset PLU (to allow the preset price
only) or an open PLU (to enforce a price entry through the numeric
keys each time).
- 10 -