RCA P46729 - Manual (Page 34)

Playback on TV or VCR Using/117£>/0/V/Z)£’i)/V Jacks
To connect your camcorder to a TV or VCR AUDIO/VIDEO /V jacks, use the audio/video cables that
were packed with the camcorder. If your TV is already connected to a VCR, you can attach the camcorder to
the VCR and watch what the camcorder is recording or playing on the TV.
Back of
Mono VCR or
TV Monitor ( 1) White
^^ Audio Plug
(©
AUDIO
IN
VIDEO
IN
0
Included
AudioWideo
Cable
(^Yellow
Video Plug
Yellow Video Plug
(?) White
Audio Plug
Yellow
Video Jack
Pull Here to
^^^¡0
Tack
Open Door Audio jack
OR
Y-Adapter
Back of (availaole from
Stereo VCR or electronics White
TV Monitor supply store) Audio
I / Plug
Included
AudioA^ideo
Cable
Yellow Video Plug
(2)Yellow
^ Video Plug Pull Here to
Open Door
Yellow
Video Jack
White
Audio Jack
(?) White
Audio Plug
Installation
(?) Attach the white plug tin one end of the included
audio/video cable to the AUDIO /A^ jack on the
TV or VCR and the other white plug to the white
audio jack located under the door on the side of
the camcorder.
Note: If your TV or VCR has stereo A i/D/0 jacks,
attach Ihe AUDIO plug to the one labeled MONO. If
one is not labeled MONO, you may need a Y-adapter
to hear sound from both channels.
(^Attach the yellow video plug on one end of the
included audio/video cable to the VIDEO /V jack
on the TV or VCR and the other yellow plug to
the yellow video jack located under the door on
the side of the camcorder.
Caution: The unauthorized recording of
television programs and other recorded
material may infringe the rights of others.
32