Optional rca dcc05 car cord adapter/charger, Powering your camcorder (continued) – RCA P46729 User Manual

Page 21

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Optional RCA DCC05 Car Cord Adapter/Charger

This adapter/charger allows you to power your camcorder from the cigarette lighter socket of a car,

truck, or RV. It converts 24- and 12-volts to a 6-volt output. It can also charge the battery that

came with your camcorder and the AV8MM (long play) battery.

Consult the instructions enclosed with the DCC05 for complete operation information.

Using the RCA DCC05 Car Cord Adapter/ Charger to Power the Camcorder

Powering Your Camcorder (continued)

1. Remove battery if it is attached to the camcorder

or car cord adapter/charger.

2. Plug one end of the DC power cord into the DC

Oi/T jack on the car cord adapter/charger and the
other end into the DC IN 6.5 kjack on the back of
the camcorder.

3. Insert the DCCOS’s plug into the vehicle’s

cigarette lighter socket. The POWER indicator on
the DCC05 will light.

Cautions: The DCC05 is designed to be used only
with vehicles having negative ground electrical
systems.

Do not use any other car cord with this camcorder.
Other car cords may damage your camcorder.

Using the RCA DCC05 Car Cord Adapter/Charger to Charge the Battery

1. Remove DC power cord if it is attached.

2. Attach the battery as shown.

3. Insert the DCC05’s plug into the cigarette

lighter socket. The POWER indicator on the

DCC05 will light.