Kenwood SPECTRUM 850 AV - Manual (Page 42)

Recording from a CD (with automatic recording-level set)
You can acjtomaticall/ set the best .necondjng level,for
recording from a CD .using the system’s,Cx)rriputer- ^
Contnolled Recording System (CCR5). . V ' .
1 Using the CD player's.DISC SELECTOR buttons,
selectaCDf .. ’ . C
2 Insert a bJank tape in tape well B,. ,
3 Select the Dolby Noise Reduction mode., Y ^
4 Press the CCRS.I^uttoh/TheCCBS light flashes:. _
o
1 mm .jmU . 1
F '------------- 1
Several different parts'of the CD .are. sampled, the
CDs peaklevelis determined, ^nd the.best recording
level for that CD [s automatically.set
The CD-.and tape, are automatically .cued up at their.
beginnings, an 8 -second.blank.space is'recorded at
the beginning of the .tape, and the. CD Ts automatically
recorded. ■ . . .. ...
5 When the system' is dc>ne recording, press the CD ...
player's OPEN/CLOSE.button.......... '
To cancel automatic recording
Press'the CD player's STOP button. If the system has
started ^recording, after you press, the, STOP button,"
press'the OPEN/CLOS.E,b.yttd.a_
Jere are a few important tips about
ia€c recording; f
^Tyou press the CCRSTutton while a CD is
paying, the CD stops, and automatic recording
giQsT ' 'Tt ’ ’
,^malac recording may not function properly
tbe^ amount of tape remaining on the cassette
Mf.SanT manually adjust the recording level
i recording balance during automatic'
scording.
The' fare instance when automatic recording
set the best feconding level, record the
nuaiiy (see ‘Recording a tape' on
EI4I), V' ;
42.