Kenwood SPECTRUM 850 AV - Manual (Page 20)

Tuning stations automatically
You can automatically find the strongest radio station
signals.
\ Select the TUIMER input . ; ' '
2 Press the BAND button to select ,FM or AM. „,
3 Press the AUTO/MAN U. button to .select,AUTQ, ^ _
The AUTO light turns O N . - ,
4 On the TUNING buttpns, press. A to rhoye^up the
broadcast band, or ▼ to move down the broadcast . ^
band. -
The tuner stops automaticaljy vyhen.it-Tnds a strong
station, and the TUNED light turns ON. If the,station,
is broadcasting in stereo, the STEREO .light turns ON..
5 Press A or ▼ again to find the next, strong signal...
o
Tuning stations manually
You can search .for radio stations in small steps up and
down the broadcast band to.tune in a weak station that
automatic tuning might miss. v . ■ '
1 Select the TUNER input
2 Press the BAND button to select FM. or AM.
3 Press the AUTO/MANU button to. select MANUAL
The AUTO light .turns .OFF..
4 On the TUNING.buttons, press A to move up the _
broadcast band, or T to move down the broadcast
band to the station you want ..
The frequency changes by 0.1 MHz (FM) or 10 kHz
(AM) each, time you press the button, or it continually .
changes if you hold the button down. , . . ’
TT
W
O
-
I T — ■
—..'V......... —
yimportant:
Edng manual tuning, the tuner receives stations
hly in mono.
^0 receive a tuned station in stereo, press the
^yrO/MANU button so.the AUTO light turns
if the statloh is broadcast in stereo, you .
|ji.cèìve Jt in stereo.
TWe'^er stations will be received with.more
cl<^round noise in stereo than in mono. To
ease the noise, press the AUTO/MANU
^button, so. the AUTO light goes OFF, _. ^
2 0 .