69 english – Clarion ProAudio VRX 935VD VRX935VD User Manual
Page 65
VRX935VD
69
English
Installation and Wire
connection manual
Black
White
Yellow
Red
White/Black
Orange/White
Glay/Black
Grass-green
Glay
Brawn
Green
Blue/White
Green/Black
Purple/Black
Purple
2
1
8
7
3
4
!
6
@
5
9
#
Blue
¡
0
*
∗1
)
(
∗1: Connecting the PHONE MUTE Terminal
The lead included with the unit must be connected to the specified position of the vehicle’s
connector in order to use the “triggered audio mute for cellular telephones” function.
∗2: Use the attached extension lead when necessary. (Provided with this unit)
Note : Before making any installation, disconnect the car battery - (negative) cable.
∗3: If a 5.1ch Surround Decoder (DVH920, sold separately) is connected and the amp of this unit is
used, set the select switch to “LINE IN”. Then the AUDIO OUT (IN) terminal of the Tuner Amp
Unit is only available for audio input, not outputting the audio.
∗4: Connect to a separately sold external amplifier with a separately sold RCA cord (L, R).
Note : When the 5.1ch Surround Decoder is connected, these terminals are only available for audio input.
∗5: Connect to a Rear View Monitor (sold separately) for the rear seat.
∗6: Connect to separately sold VTR equipment with a separately sold connection cord.
(LINE IN) D
N (LINE OUT)
No.
Description
1
REAR RIGHT+
2
REAR RIGHT-
3
FRONT RIGHT+
4
FRONT RIGHT-
5
FRONT LEFT+
6
FRONT LEFT-
7
REAR LEFT+
8
REAR LEFT-
9
+12 V MAIN POWER
0
Amplifier turn-on lead
!
ILLUMINATION
@
+12 V ACCESSORY
#
GROUND
$
CCD camera
%
VISUAL 2 terminal
¥
Radio antenna jack (
∗2)
&
CeNET terminal
*
Phone mute (Brown) (
∗1)
(
Spare terminal (Yellow)
)
Parking brake (Grass-Green)
¡
AUTO ANTENNA