Clarion ProAudio VRX 935VD VRX935VD - Manual (Page 21)

VRX935VD
25
English
Owner
’s
manual
Basic Operations
Changing the setting of the display
background
1. Press the [DISP] button for 1 second or
longer to show the background setup menu.
∗ This menu appears only during Radio and
DVD (with CD, MP3), CD/MD changer mode,
and when the car is moving.
2. Touch the setting key to show the setup
display.
●To set up the motion pattern
2-1. Touch the [MOTION] key to set a
desired motion pattern.
2-2. Touch a desired MOTION PATTERN.
●To set up the sprite pattern
2-1. Touch the [SPRITE] key to set a desired
sprite pattern.
2-2. Touch a desired SPRITE PATTERN.
●To set up the wall color
2-1. Touch the [WALL COLOR] key to set a
desired wall color.
2-2. Touch a desired WALL COLOR.
3. Press the [DISP] button again or touch the
[RTN] key to return to the STANDARD
screen.
FM reception
For enhanced FM performance the ®
tuner includes signal actuated stereo control,
Enhanced Multi AGC, Impulse noise reduction
curcuits and Multipath noise reduction circuits.
Changing the reception area
This unit is initially set to USA frequency
intervals of 10kHz for AM and 200kHz for FM.
When using it outside the USA, the frequency
reception range can be switched to the intervals
of 9 kHz for AM and 50 kHz for FM.
●Setting the reception area
1. While pressing [DISP] button, each time you
press and hold the number “6” of the
[DIRECT] buttons for 2 seconds or longer,
the reception area switches from inside the
USA to outside the USA or from outside the
USA to inside the USA.
∗ Any station preset memories are lost when the
reception area is changed.
Listening to the radio
1. Press the [FUNC] button and select the
RADIO mode. The frequency is displayed.
2. Press the [BND] button and select the radio
band. Each time the button is pressed, the
radio reception band changes in the
following order:
FM1
➜ FM2 ➜ FM3 ➜ AM ➜ FM1...
3. Press the [ a] or [d] button to tune in the
desired station.
∗ When the panel is open, the same operation
is also available by using the [ a] or [d]
button in the panel.
Radio Operations
WARNING
Perform the setting of this function only
when the car is stopped and the parking
brake is applied.