Clarion ProAudio VRX 935VD VRX935VD - Manual (Page 42)

46
VRX935VD
English
Owner
’s
manual
CD/MD Changer
Operations
Note:
• When an optional DVD (CD/MD) changer is
connected through the CeNET cable, this unit
controls all DVD (CD/MD) changer functions. This
unit can control a total of 2 changers (MD and/or
CD and/or DVD).
CD/MD changer functions
Press the [FUNC] button and select the CD
changer mode to start play. If 2 CD (MD)
changers are connected, press the [FUNC]
button to select the CD (MD) changer for play.
∗ If “NO MAGAZINE” appears in the display, insert
the magazine into the CD changer. “DISC
CHECKING” appears in the display while the
player loads (checks) the magazine.
∗ If “NO DISC” appears in the display, eject the
magazine and insert discs into each slot. Then,
reinsert the magazine back into the CD changer.
∗ If “NO DISC” appears in the display, load MDs
into the MD changer.
Pausing play
1. Press the [ s s s s s] button to pause play.
“PAUSE” appears in the display.
2. To resume play, press the [ s s s s s] button
again.
∗ When the panel is open, the same operation
is also available by using the [ s] button in
the panel.
Switching the CD TEXT titles
This operation is only possible when this unit is
connected with a CD TEXT compatible CD
changer.
You can select the CD TEXT titles among the
disc titles, track titles and artist titles.
When the panel is closed:
1. Press the [DISP] button to show the SUB
display. The disc title, track title or artist titles,
user title is displayed.
2. Each time you press and hold the [DISP]
button for 1 second or longer, the display
toggles among the disc title, the track title or
the artist titles, user title.
The selected title scrolls once.
CD-ROM discs cannot be played in the CD
changer.
CAUTION
Switching CONNECT(connect)
Make the following settings when an external
device is connected to the VISUAL 2 terminal.
NAVI: when a navigation system is
connected
∗ When a navigation system is
connected, use the monitor lock
function. Locking the monitor locks
the screen size in F.WIDE mode (full
wide) and the VTR system to NTSC.
OTHERS: for external devices other than a
navigation system
NONE: when no external devices are
connected
∗ The factory default setting is “NONE”.
1. When the panel is open, press the [ADJ]
button to display the ADJUST MODE menu.
2. Touch the [ z] key two times to select
“CONNECT”.
Touch the [CONNECT] key to select “NAVI”
or “OTHERS” or “NONE”.
3. Press the [ADJ] button again or touch the
[RTN] key, the unit returns to the previous
mode.
VISUAL Operations