Clarion ProAudio VRX 935VD VRX935VD - Manual (Page 53)

VRX935VD
57
English
Owner
’s
manual
5.1ch Surround Decoder Operations
Output adjustment of subwoofer
volume, center volume and balance/
fader
1. Press the [A-M] button and touch the
[DETAIL] key.
2. To make an adjustment on :
●Subwoofer volume adjustment
2-1. Touch the [SUBWOOFER VOL] key, then
touch the [ w] or [z] key to adjust to
desirable level.
∗ The factory default setting is “0”. (Setting
range : -6 to 3)
●Center volume adjustment
2-1. Touch the [CENTER VOL] key, then touch
the [ w] or [z] key to adjust to desirable
level.
∗ The factory default is “0”. (Setting range : -6
to 0)
●Balance/Fader adjustment
2-1. Touch the [BAL/FAD] key.
Touch the [ w] or [z] key to adjust the balance
level.
[ w] key: emphasized the sound from the
front speakers.
[ z] key: emphasized the sound from the
rear speakers.
2-2. Touch the [ Å] or [Î] key to adjust the fader
level.
[ Å] key : emphasized the sound from the
left speakers.
[ Î] key : emphasized the sound from the
right speakers.
3. When the adjustment is complete, touch the
[RTN] key or press the [A-M] button to return
to the STANDARD screen.
DSF mode
DSF effect ON/OFF
∗ The factory default setting is “OFF”.
1. Press the [A-M] button.
2. Touch the [STATUS] key.
3. Touch the [DSF] key to select “on” and “off”.
4. Each time the [ON/OFF] key is touched, the
on and off statuses are switched alternately.
5. After the setting, press the [A-M] button
again or touch the [RTN] key to return to the
STANDARD screen.
Note:
• If the DSF effect is set to OFF, the adjustment
made in “DSF” is not reflected in the music source.
Selecting the DSF type
1. Press the [A-M] button and touch the [DSF] key.
2. Touch the key for the desirable type to select it.
3. When the setting is finished, touch the [RTN]
key or press the [A-M] button to return to the
previous mode.
P.EQ mode
P.EQ effect ON/OFF
∗ The factory default setting is “OFF”.
1. Press the [A-M] button.
2. Touch the [STATUS] key.
3. Touch the [P.EQ] key to select “on” and “off”.
4. Each time the [ON/OFF] key is touched, the
on and off statuses are switched alternately.
5. After the setting, press the [A-M] button
again or touch the [RTN] key to return to the
STANDARD screen.
Note:
• If the P.EQ effect is set to OFF, the adjustment
made in “P.EQ” is not reflected in the music
source.