Clarion ProAudio VRX 935VD VRX935VD - Manual (Page 41)

VRX935VD
45
English
Owner
’s
manual
VISUAL Operations
Front image
(receiver
screen)
Rear monitor
image
(separately
sold)
Vehicle speaker
sound
Image of device
connected to the
Visual 2 terminal
(
∗3)
Image of device
connected to the
Visual 2 terminal
Image of device
connected to the
Visual 2 terminal
(
∗3)
Displays image of
mode selected
using the [FUNC]
button Image of device
connected to the
Visual 2 terminal
(
∗3)
Image of device connected to the
Visual 1 terminal Displays image of
mode selected
using the [FUNC]
button (
∗2)
Plays sound of mode selected using the [FUNC] button
2 ZONE
Front monitor lock
Visual 2 connection
[OTHERS]
Visual 2 connection
[NAVI]
Rear monitor
lock
3 ZONE
(
∗1)
∗1 A device connected to the Visual 2 terminal should be set up as described in the section
“Switching Connect.”
∗2 No image is displayed on the rear monitor when a non-image mode such as radio, CD, etc. is
engaged.
∗3 For safety reasons, this image is not displayed when the vehicle is moving. The picture can be
watched only when the vehicle is standing still and the parking brake is engaged.
2-ZONE: 1 (front monitor lock)
1. Press the [M.L] button.
2. Press the [FUNC] button to select the
desired mode.
3. To cancel the monitor lock, press the [M.L]
button.
The screen shows the image of the selected
mode.
∗ When the front monitor lock is engaged,
[MENU], [LIST], [KEY PAD], [ADJ] and [A-M]
button cannot be used. Cancel the monitor
lock when you wish to use these buttons.
2-ZONE: 2 (rear monitor lock)
1. Press the [ADJ] button to display the
ADJUST MODE menu.
2. Touch the [REAR MONI LOCK] key and the
[ON] key.
3. Touch the [RTN] key or press the [ADJ]
button.
4. To cancel the monitor lock, press [ADJ]
button, touch the [REAR MONI LOCK] key
and the [OFF] key.
5. Touch the [RTN] key or press the [ADJ]
button.
The monitor lock is now canceled.
Locking the front monitor and rear
monitor (3-ZONE)
1. Lock the rear monitor by performing the
instructions in steps 1 to 3 above.
2. Press the [M.L] button to lock the front
monitor.
3. Press the [FUNC] button.
The image for the selected mode is
displayed for about 5 seconds after which
the front monitor lock image is displayed.
4. To cancel the monitor lock, press the [M.L]
button.
5. To cancel the rear monitor lock, press the
[ADJ] button, touch the [REAR MONI LOCK]
key and the [OFF] key.
●Lock system monitor image and sound