Clarion ProAudio VRX 935VD VRX935VD - Manual (Page 30)

34
VRX935VD
English
Owner
’s
manual
Scan playback
Scans and plays back all chapters recorded on
the DVD-Video, the first 10 seconds for each.
1. Touch the screen and touch the [SUB
MODE] key.
2. Touch the [CHAPTER SCAN] key, then
touch the [RTN] key.
After scan playback of all chapters on the
disc, chapter scanning through the same
disc is performed again.
Depending on the disc, the menu may
appear again after scan playback of all
chapters within the title.
3. Touch the [CHAPTER SCAN] key again,
and scan playback is turned off.
Repeat playback
This operation plays back chapters/titles
recorded on the DVD-Video repeatedly.
●Chapter repeat:
Plays back one chapter repeatedly.
1. Touch the screen and touch the [SUB
MODE] key.
2. Touch the [CHAPTER REPEAT] key, then
touch the [RTN] key.
3. Touch the [CHAPTER REPEAT] key, repeat
playback is turned off.
●Title repeat:
Plays back all chapters within the title
repeatedly.
1. Touch the screen and touch the [SUB
MODE] key.
2. Touch the [TITLE REPEAT] key, then touch
the [RTN] key.
3. Touch the [TITLE REPEAT] key, repeat
playback is turned off.
TOP function
The TOP function resets the DVD player to the
first chapter of the track.
1. Press the [BND] button to playback the first
chapter(chapter No. 1).
DVD Video Player Operations
Fast forward and fast backward
1. Press and hold the [ a] button or [d] button
during playback.
Press and hold the button, and the playback
speed becomes 4-time faster first and then
16-time faster 3 seconds later. Release the
button, and the normal speed is restored.
• No audio is reproduced during fast forward
and fast rewind operation.
• The fast forward and fast rewind speed
may differ depending on the disc.
• The menu screen may appear when the
button is pressed.
Searching with a chapter/title
number
You can locate the beginning of the scene using
the chapter numbers or title numbers recorded
on the DVD-Video disc.
1. Display the sub KEY PAD using the
procedures described in the section “KEY
PAD operation”.
2. Touch the [SRCH] key.
Each time you touch the [SHIFT] key, you
can switch between title number input “[T**]”
and chapter number input “[C***]”.
• Title
A large segment to divide the data area of
the disc.
• Chapter
A small segment to divide the data area of
the disc.
3. Input the number of the title that you want to
play back with the [0] to [9] key.
4. Touch the [ENT] key.
Playback starts from the scene of the input
title number or chapter number.
• If the input title number does not exist or
searching with a title number is not
allowed, the following message appears to
invalidate the input.