beautypg.com

1ch surround decoder operations, 55 english, Triggered audio mute for cellular telepones – Clarion ProAudio VRX 935VD VRX935VD User Manual

Page 51: 1ch surround decoder control function

background image

VRX935VD

55

English

Owner

’s

manual

Other Functions

Setting the visual input sound level

You can adjust an input sound level of visual1/2.

∗ The factory default setting is “HIGH”(high).

1. Press the [ADJ] button to display the

ADJUST MODE menu.

2. Touch the [

] key to select “VISUAL AUX

SENS”.

3. Touch the [VISUAL AUX SENS] key to select

HIGH”(high) or “MID”(mid) or “LOW”(low).

4. Touch the [HIGH] or [MID] or [LOW] key to

select desired mode and set it.

5. Press the [ADJ] button or touch the [RTN]

key to return to the previous mode.

Triggered audio mute for cellular
telepones

This unit requires special wiring to mute the
audio signal automatically when a cellular
telephone rings in the car.

∗ This function is not compatible with all cellular

telepones. Contact your local authorized Clarion
dealer for information on proper installation and
compatibility.

5.1ch Surround Decoder control
function

This function is available when a 5.1ch
Surround Decoder (DVH920) is connected.

When the 5.1ch Surround Decoder (DVH920,
sold separately) is CeNET connected, the 5.1ch
Surround Decoder Control unit (DVC920, sold
separately) cannot be used.

This section describes operation procedures only.

For other details, refer to the owner’s manual
supplied with the 5.1ch Surround Decoder.

∗ For details on functions of each mode, refer to the

owner’s manual supplied with the DVH920.

1. Press the [ADJ] button to show the ADJUST

MODE menu.

2. Touch the [SOUND] key.

SOUND

3. Touch the required keys to make the desired

setting.

SPEAKER SEL (speaker sel)
This function determines center speaker,
surround speaker and sub woofer connection.

3-1 Touch the [SPEAKER SEL] key to show the

submenu.

3-2 Touch the [CENTER SP], [SURROUND SP]

or [SUB WOOFER] key and the [ON] or
[OFF] key to turn speakers on or off
depending on what speakers are connected.

• The default value is “ON”.

• The phase of the “SUB WOOFER” is

reversed in the ON- setting. The default
value is “ON+”.

5.1ch Surround Decoder
Operations