Function keys, 0 tone key, 0 shift key – Kenwood TM-521E User Manual
Page 9: 0 rev (reverse) key, With the tm-221a/321a/421a/521a), With the tm-221es/421es/521e), 0 scan key, 0 alert key (tm-221 es/421es only), 0 alt key (tm-521e only), Display panel
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1. Function Keys
With the TM-221A/321A/421A/521A
0 (D
0 0
SHIFT
REV '
SCAN
CTCSS
TONE
0 TONE key
Activates the tone circuit for repeater control. This
key is also used to open the squelch of a distant sta
tion who has activated its CTCSS key. Refer to Sec
tions 4-6 REPEATER and 4-8 TONE SQUELCH
(CTCSS) for additional information on this control.
With the TM-221ES/421ES
SHIFT
rev
'
SCAN
ALEFIT
TONE
With the TM-521E
0
0
0
0
0
SHIFT
rev
'
SCAN
alt
'
TONE
0
SHIFT key
The SHIFT key is used to select the desired transmit
ter offset during repeater operations. When the key
is pressed, the shift modes cycle from
-I-
to — [ — to
----- (European version)] to simplex (no indicator).
(See Section 4-6 REPEATER)
0 REV (Reverse) key
When the REV key is depressed it is used to reverse
the
transmit/receive
frequencies
during
repeater
operations.
(With the TM-221A/321A/421A/521A)
This will allow you to check the input of the repeater
or to operate on a reverse repeater pair.
(With the TM-221ES/421ES/521E)
This will allow you to check the input of the repeater.
Transmission is inhibited when the REVERSE key is
engaged.
0
SCAN key
Press the SCAN key to initiate scanning, press again
to cancel scan. For additional information on this
function refer to Section 4-5 SCAN.
0 CTCSS (Continuous Tone Coded Squelch
System) key (TM-221A/321A/421A/521A only)
Refer to Section 4-8 TONE SQUELCH (CTCSS) for
additional information on this key.
0 ALERT key (TM-221 ES/421ES only)
This switch is used to activate the priority alert func
tion. See Section 4-5-6 Priority Alert for additional
information on this function.
0
ALT key (TM-521E only)
This key is used to activate the Automatic Lock Tun
ing system. See Section 4-2-4 for additional infor
mation on this key.
2. Display Panel
With
the
TM-221A/321A/421A/521A
Note:-------------------------------------------------
The TM-221 A Display Panel is used for illustration
purposes.
(
0
)-
SCAN CTCSS
,,, c
o n n
U.Ji I u
^
ll EBl □□□□□□□□□□□□□□
TONE
-S&RF
OVER
With the TM-221 ES/421ES/52IE
Note:------------------------------------------
The TM-221 ES Display Panel is used for illustration
purposes.
• ®
With the TM-521 series
Note:----------------------------
The TM-521 Display Panel is used for illustration
purposes.
® (D
scan
CTCSS
n c n n
I«
LJi U U
S&Rf
OVER