Brother FAX-60 - Manual (Page 32)

26
RECEIVING
S Y M P T O M P O S S I B L E C A U S E A C T I O N
Received copies are blank 1. The paper roll is In
backwards.
1. Reload the paper roll
correctly.
2. Wrong type of paper. 2. Replace with proper thermal
recording paper.
The telephone rings 1. Auto answer Is turned off. 1. Turn atuo answer switch
continuously 2. No power.
3. No recording paper roll
ON. It is located on the
front of the unit.
2. Check outlet voltage.
3. Load the new paper roll.
Recording paper is jammed Paper is jammed in receiving
section.
1. Turn the power off.
"CAUTION: BOTH ICM AND
OGM MESSAGES WILL BE
ERASED IN THE EVENT OF A
POWER INTERRUPTION. CARE
SHOULD BE EXERCISED WHEN
UNPLUGGING THE UNIT OR
TURNING OFF THE UNITS MAIN
POWER SWITCH."
2. Press the recording paper
cover button to open the cover.
3. Remove the paper roll and tear
off the jammed paper.
4. Reload the paper roll.
5. Close the cover making sure
you hear it click into place.
6. Tear off excess paper.
Error Indicator is lit Communications error has occured-
this us usually caused by a bad
phone line.
1. Ask the transmitting unit to
re-send the document.
Make sure the other unit is a
Group 3 compatible machine.
Make sure your unit is properly
connected to the phone line.
4. Make sure the other unit Is
working properly.
2 .
3.