Brother FAX-60 - Manual (Page 21)

15
TELEPHONE AND ANSWERING MACHINE FEATURES
I. HOW TO USE THE FAX-60 AS A TELEPHONE
The FAX-60 possesses very sophisticated telephone capabilities. Yet, these capabilities are easy
to use.
Please note that the FAX-60 can be used for voice conversation even when the unit is set to
automatic facsimile reception mode or when the unit is copying a document.
A. Telephone Controls
All numbers are dialed from the numeric key pad on the control panel of the FAX-60. This pad is
identical to the standard touch-tone telephone dial.
The four buttons to the left of the telephone key pad are used (from the top) as follows:
• PAUSE - When pressed, a 3.7 second pause is generated. This
buttonhas other uses in telephone-related programming
(see below).
• REDIAL - Pressing this button makes the phone automatically redial
thelast number dialed. This button has additional uses (see
below).
Presssing this button initiates speed dial calls. This key is
alsoused to program the speed dial numbers into the unit’s
memory.
Pressing this button allows you to initiate phone and fax
calls while the handset is on-hook. The built-in speaker
(under the handset) allows hands-off operation of the
FAX-60 while dialing. This button has other uses (as
we've discussed in facsimilerelated programming). Please
note, however, the FAX-60 is NOT a "speaker phone!"
The other telephone-reiated controls are located at the back of the unit:
• PULSE/TONE Selects rotary vs. tone mode of operation
• RINGER VOLUME Offers three settings - High, Medium, Low
• SPEAKER VOLUME A rotary switch provides continuous volume control from
HIGH (H) to LOW (L).
• SPEED DIAL -
HOOK
B. Using the handset
The handset of the FAX-60 is used just like any other handset of a standard telephone. Please
note the volume adjustment switch on the inside of the handset.