Brother Fax-170 - Manual (Page 38)

C H A P T E R F I V E
See Remote
Codes p. 41
RING TIME:XX SEC
^ to exit.
Now, when a call comes in and the machine is set to F/T Mode, all phones on this
line will ring the number of times you selected in Ring Delay.
You can let the fax machine pick up and detect if it’s a fax or voice call. If it’s a
fax call, the machine prints the fax. If it’s a voice call, the machine signals you
with a double ring for the length of time you selected in F/T Ring Time.
Even if the caller hangs up during the double ringing, the fax machine continues
for the set time. If you don’t pick up during the ring time, the fax machine begins
sending a fax tone, even if the caller is still on the line.
Speaker Volume________________ ______
You can set the volume of the fax machine speaker.
Press (FuncHonj. in, in.
S'* Press 0] or Ul to select your volume setting (OFF, LOW, MEDIUM, or HIGH).
^ Press @ when the screen displays your selection.
H- Press S to exit.
Even if you select OFF, the sounds you hear after pressing ftM remain on LOW.
Ring Volume _________ _______________
You can select how loudly, or if, the fax machine rings.
Press [Functionl, [0, |T].
8"’ Press 0] or (T| to select OFF, LOW, MEDIUM, or HIGH.
9^’ Press (§f] when the screen displays your selection.
H- Press H to exit.
Even if you select OFF, the ring volume will remain on LOW in F/T mode, and on
LOW in Call Reservation and Distinctive Ringing (if they’re set to ON).
Smoothing___________________________
when activated, this feature enhances the appearance of incoming faxes by
“smoothing” lines, It takes no longer to receive faxes in this setting, which comes
set to ON.
You cannot use “smoothing” for outgoing faxes, or for printing lists and reports.
Press [Functionl, |T|,[I].
Press 0] or 0] to choose ON or OFE
^ Press S.
m«- Prpcc iSffttl) ovit