Contrast setting, Manual tvansmission, Contrast setting manual transmission – Brother Fax-170 User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
c
ii
A t’ T 1-: ]i h' 1V [■;
Press iResolutionj (before you send the fax)to select the resolution for the
document you’re sending,
Standard — suitable for most typed, documents.
Fine — good for small print; transmits a little slower than standard
resolution.
Super Fine — good for small print or artwork; transmits slower than fine
resolution.
Photo — use when document has varying shades of gray; slowest
transmission time.
DO NOT use curled, wrinkled, folded, or ripped paper, or paper with staples
paper clips, paste or tape attached. DO NOT use cardboard, newspaper, or
Mric.
Make sure documents written with ink are completely dry.
Contrast Setting
If your document is very light or very dark, you might want to set the contrast
accordingly.
Insert the document, face down, in the feeder.
Press iFuflctionl, m, in.
3 Use B or [g to select AUTO, S.IIGHT, or S.DARK.
4
When the screen displays your selection, press 0.
§ Press 1^ to exit.
'6 Press
to send a fax — OR — Press fCo^ to make a copy.
Manual TVansmission
See
One-Touch
p,18
Manual transmission lets you hear the dial tone, ringing, and fax chirps before
sending the fax. Don’t wait too long to press after you hear the chirp, or your
fax machine will go into receiving mode.
.;i Insert the document face down in the feeder.
‘2' Pick up the handset and listen for a dial tone — OR — Press jHookl and
listen for a dial tone.
3
Enter the fax number you want to call (you can enter the digits using the
ke)^ad, or you can enter a One Touch or Speed Dial number or you can
call from the Tel-Index).