Brother Fax-170 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I N S T A L L A T I O N
Do not connect a TAD elsewhere on the same phone line — your fax machine
and TAD will both try to control the line.
Connections
The TAD must be plugged into the left side of the fax machine, into the jack
labeled EXT Your fax machine cannot work properly if you plug the TAD into a
wall jack.
Plug the telephone line cord from the wall jack into the left side of the fax
machine, in the j ack labeled LINE.
Plug the telephone line cord fix)m your TAD into the left side of the fax
machine, in the jack labeled EXT. (Make sure this cord is connected to the
TAD at the TAD’s telephone line jack, and not its telephone set jack.)
3 Press
[Model
until the screen displays [ T R D
H S 1.1
n ).
4' Set your TAD to 4 rings or less. (The fax machine's Ring Delay setting does
not apply).
iS' Set the TAD to answer calls,
;;fi Record the outgoing message (see below).