Kenmore 385. 17622 User Manual

Page 12

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SECTION 2. PREPARE THE MACHINE FOR SEWING

Wind the Bobbin (Continued)

bobbin winding tension disc as shown, bobbin as shown.

spindle with end of thread coming
from the top of the bobbin. Push

bobbin winding spindle to the right

until it clicks. Holding onto end of
thread, start machine. When bobbin is
slightly filled, snip off end of thread.

Push bobbin winding spindle to the
left and clip thread. Remove bobbin.

Turn clutch knob away from you

while holding hand wheel for normal
sewing operation.

Insert the Bobbin into the Bobbin Case

Place bobbin in bobbin case

making sure thread feeds clock

wise

and

coming

from

bobbin as shown.

Pull thread through slot of case
as shown.

Puli thread under tension

spring and through the opening
as shown above. Pull 3 to 4
inches of thread from bobbin.

Holding latch open, position

case into shuttle and release

latch.

Case should lock into place

when latch is released.