Time and status display, Q estimated time remaining, Note – Kenmore ELITE 796.292796 User Manual
Page 18: 0 cycle status indicator
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
HOW TO USE
TIME AND STATUS DISPLAY
The time and status display shows the estimated time remaining and cycle progress.
f
Wash
Rinse
Spin
T
m
z
o
r
Q ESTIMATED TIME REMAINING
® When the START/PAUSE is pressed to start a cycle,
the washer automatically detects the wash load
(weight) and optimizes the washing time, based on the
selected cycle and options. The display will then
indicate the estimated time remaining for the selected
wash cycle.
NOTE:
•The time shown is estimated. For example, the time
displayed may pause for a period of time while the
machine is heating the water or balancing the load.
Under certain conditions, the machine can pause for
extended periods of time.
•
• Estimated time is based on normal operating
conditions. Several external factors (load size, room
temperature, incoming water temperature, etc.) also
affect the length of estimated time vs. actual time.
0 CYCLE STATUS INDICATOR
These status LEDs illuminate to indicate which portion
of the cycle is currently running. A blinking light
indicates the active portion of the cycle. When that
portion is complete, the light will remain steady.
18