0 sort laundry and load washer, Q add detergent, 0 turn on the washer – Kenmore ELITE 796.292796 User Manual

Page 13: 0 select a cycle, 0 select cycle modifiers & options, O begin cycle, How to use, Operating the washer

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

HOW TO USE

OPERATING THE WASHER

0 SORT LAUNDRY AND LOAD WASHER

Refer to page 15.

ADD DETERGENT

Add HE detergent to the detergent dispenser drawer. Refer to page 17 for
details.

0 TURN ON THE WASHER

Press the POWER button to turn on the washer. The lights around the Cycle
Selector Knob will illuminate and a chime will sound, if turned on. Refer to
page 12.

(7)

;; Express Wash

;; Cold Cleon

Sanitize

Délicates

Handwash/Wool

Workout Wear

Rinse/Spin

0 SELECT A CYCLE

Turn the Cycle Selector Knob either direction to select the desired cycle. The

preset Wash/Rinse Temperature, Spin Speed, Soil Level, and Option settings

for that cycle will be shown. Refer to page 12.

I..~................... f

i Save Energy©! Fabric Softener |

I Extra Rinse |

Soak I

I Add A Garment p

Deloy Wash |

I Clean Wosher |

Drain & Spin I

0 SELECT CYCLE MODIFIERS & OPTIONS

Extra Hot/Cald Exirc. High

Hot/Cold High

WoterTemp Spin Speed!; Soil Level

Default settings for the selected cycle can now be changed if desired. Use

the cycle modifier buttons as shown on page 19. Cycle options can also be
added using the option buttons as shown on pages 20 - 22.

NOTE:

To protect your fabrics, not all modifiers are available on all cycles.

NOTE:

Not all options are available on all cycles. A different chime will sound

and the LED will not come on if the selection is not allowed.

START/PAUSE

O BEGIN CYCLE

Press the START/PAUSE button to begin the cycle. The lid will latch, the
display will change, and the washer will calculate the estimated time
remaining. Once the washer has calculated the estimated total cycle time,

the washer will start. To pause the cycle at any time, press PAUSE. To

resume the cycle press START/PAUSE again.
Press the START/PAUSE button to pause the cycle to add articles to the
load. The ADD A GARMENT light will be lighted for a time near the beginning
of the wash cycle to indicate when it is safe to add items to the load.

NOTE:

It is not recommended to add items unless the ADD A GARMENT

light is illuminated as this could result in poor performance.

NOTE:

When the wash cycle is finished, the beeper (if set) will sound and the lid will unlock. To prevent wrinkling, remove

items from the washer immediately after the end of the cycle.

NOTE:

The CASCADE wash action is available for 8 lb. or larger loads in the NORMAL/CASUAL or HEAVY DUTY cycles.