Inserting the bobbin – Kenmore 385.11703 User Manual

Page 20

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Inserting the bobbin

Place the bobbin in the bobbin holder with the

thread running off counterclockwise,

® Thread

(?)

Bobbin holder

Guide the thread into the notch on the front of

the bobbin holder.

(D Notch on the front

Draw the thread to the left, sliding it between

the tension spring blades.

Continue to draw the thread lightly until the

thread slips into the notch on the side.

® Notch on the side

Pull out about 10 cm (4") of thread to the rear.

Reattach the hook cover plate.

® Thread

0 Hook cover