Releasing the handle, Handle mounted, Attachments – Kenmore 116.31722 User Manual
Page 8: To use attachments, Warning, Attachments -10, Brush
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
RELEASING THE HANDLE
Release the handle by pressing down on
the handle release pedal with your foot and
pulling back and down on the handle with
your hand.
ON/OFF SWITCH
HANDLE MOUNTED
SOME MODELS
To start the vacuuni cleaner, sfide the
On/OfI svvitch from the OFF position to the
ON position. To stop the vacuum cleaner,
slide t/:e On. Otf switch to the OFF position.
ATTACHMENTS
Telescoping
W and
Dusting
Brush
Combination
Brush
Identify each of the attachments shown
above.
TO USE ATTACHMENTS:
Place the carpet/bare floor selector in the
bare floor setting by rotating the selector
back and down to the bare floor setting.
See CARPET/BARE FLOOR SELECTOR
section.
When reluming the bare floor selector to
the carpet setting, use caution as the selec
tor can move quickly to that setting due to
tension created by the belt.
Remove the lower end o( the stretch hose
from the cleaner by grasping the hose col
lar, twisting and pulling straight out. The
attachments can now be added to the hose.
NOTE: The motor protector may open when
using attachments or when cleaning new
carpet, due to reduced airflow by the attach
ments themselves or by new carpet fuzz fill
ing the dust bin quickly. See the
TROUBLESHOOTING section.
WARNING
Electrical Shock And Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in elec
trical shock or persona! injury from
cleaner suddenly starting.