Kenmore 116.31722 - Manual (Page 14)

DUST BIN CLEANING
Always empty the dust bin when dirt
level reaches the “MAX” line.
TO REMOVE DUST BIN:
WARNING
Always unplug power cord from
electrical outlet before performing
any service on vacuum.
Lift dust bin han­
dle located at the
top of the dust
bin.
Puil the handle
fonvard and lift
dust bin up and
out of the vacu­
um cleaner.
Every time dust bin
is removed, rotate
cleaning knob on top
of dust bin at least two
complete revolutions
to activate filter clean­
ing system and to.
maintain cleaning per­
formance.
Remove any
clogs that might
be located in the
dust bin port or
the secondary fil­
ter
TO EMPTY DUST BIN;
Rotate dust bin lid
counterclockwise
and lift off.
Pour dust bin contents
into a trash container.
TO REPLACE DUST BIN:
Tail
Replace dust bin lid by placing back on dust
bin with the tab on the lid aligned with the
word “OPEN" on the back of the dust bin.
Rotate lid clockwise while pressing down­
ward so that the handle aligns with the front
of the dust bin.
Place dust bin
back into vacuum
cleaner by insert­
ing the bottom
first and tilt back
with the dust bin
handle raised.
Lower the dust
bin handle to lock
dust bin in place.
14