Light bulb changing, Warning, Caution – Kenmore 116.31722 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
LIGHT BULB CHANGING
WARNING
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in elec
trical shock or personal injury from
cleaner suddenly starting.
TO REMOVE LIGHT BULB:
Disconnect power cord from electrical out
let. Place the carpet/bare floor selector in
the carpet position and lower handle to lay
vacuum flat.
Slide latches
outward and
remove nozzle
cover
CAUTION
Do not use a bulb rated over 15W.
During extended use, heat from the
bulb could overheat surrounding
plastic parts.
Remove the
light bulb by
pushing the
bulb in while
turning coun
terclockwise to
release from
the slot.Then
pull the light
bulb straight
out.
To replace the
light bulb care
fully insert and
turn clockwise
to securely fit
into slot.
NOTE: See PARTS AND FEATURES for
bulb #.
CAUTION
Do not plug in or turn on until the
vacuum is completely reassembled.
Replace the
nozzle cover
and secure
the latches.
Nozzle Cover
■?1