Kenmore 116.31722 - Manual (Page 10)

TO STORE ATTACHMENTS:
Remove dusting brush or combination
brush. Snap into appropriate storage loca­
tion.
Remove crevice tool from the wand by twist­
ing. Lay aside.
Remove the extension wand from the hose.
Twist the wand to the left and pull from the
hose end.
Unlock tho wund by turning tho wand lock­
ing ring to the
UNLOCK position.
Slide the lower wand into the upper wand.
Turn the wand locking ring to the LOCK
position.
Place the crevice tool down into the com­
pressed wand. Snap into the appropriate
storage location.
Reinsert the hose fully into the opening on
the lower body from which it was removed.
Press firmly to assure connection
CAUTION
DO NOT pull the vacuum cleaner
around the room by the hose.
Property damage could result.
EXTENSION HOSE:
SOME MODELS
Some models include an extra hose which
connects to the stretch hose on the vacuum
fora longer cleaning reach.
Extension Hose
ÈQÉ
Insert the two tabs on the end of the
extension hose into the two "J” shaped slots
on the unit hose and twist to connect.
All attachments and the telescoping wand
can be attached to the open end of the
hose.
FLOOR BRUSH AND WAND:
SOME MODELS
Some models have an extra brush and wand
for cleaning bare floors. Twist one end of the
aduplor Into tho lloor brusti and the oliior
end into the slraigtit wand. Connect ttie
straight wand to the telescopic wand and
then to the vacuum hose or extension hose.
Floor Brush-------V t
=i(mc
Adaptor -J \ [
(Œ
W and
-J-
CAUTION
When using the regular hose or with
the extension hose attached, the
cleaner should be on a solid surface
on the same level or below the level
of the user's feet, DO NOT use the
hoses when the cleaner is above the
level of the user’s feet.
ATTACHMENT USE CHART
CLEANING AREA
ATTACHMENT
Furniture*
Between
Cushions* Drapes* Stairs Walls
DUSTING BRUSH X X X
CREVICETOOL X X X
COMBINATION BRUSH ^ X X X
'Always clean attachments before using on fabrics.
10