Assembly instructions, Warning, Handle assembly – Kenmore 116.31722 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ASSEMBLY INSTRUCTIONS
WARNING
Electrical Shock Hazard
Do not plug into the electrical sup
ply until the assembly is complete.
Failure to do so could result in eiec-
trical shock or injury.
HANDLE ASSEMBLY
Before assembling your vacuum cleaner, be
sure you have all the parts as shown in
PARTS AND FEATURES,
Remove the screw located just below the
lop edge of the back of the vacuum.
Position the handle as shown in the illustra
tion below.
Slide the handle into the opening at the top
of the vacuum.
Insert the screw so it passes through the
handle into the vacuum.
Begin to tighten the screw with your fingers.
It may be necessary to adjust the handle
slightly.