Canon VC-C50iR - Manual (Page 75)

ID Mode
37
ENGLISH
3 2 1 AF
6 5 4 MF
9 8 7
0
MENU ID
HOME
Fn
BRIGHT
ON SCREEN
∞
SET/OK CANCEL
ZOOM
T
W
1. Press the
i button.
The LEDs on all the adjacent connected cameras blink orange
(at 0.5-second intervals).
To cancel ID mode operation, press the
c or i button. The
LEDs on all the ID2 cameras turn green and the LEDs on the
other cameras turn orange.
2. Press the
0 button.
The LEDs on all the cameras turn green as for normal operation.
This completes ID mode cancellation. All the cameras will now
respond simultaneously to the signals from the wireless controller.
Cancelling ID Mode
In this example, the selection made in the previous section of the cameras with
ID number 2 is cancelled. The camera LEDs are as shown below.
Orange
ID3
Green
ID2
Green
ID2
Orange
ID1
Green
ID3
Green
ID2
Green
ID2
Green
ID1
Blinking orange
ID3
Blinking orange
ID2
Blinking orange
ID2
Blinking orange
ID1
Check the LEDs on all the adjacent connected cameras to ensure that all the
cameras are receiving the signals from the wireless controller.
NOTE