beautypg.com

English – Canon VC-C50iR User Manual

Page 47

background image

9

a Safe Use of Equipment

ENGLISH

20. Safety Check - Upon completion of any

service or repairs to this equipment, ask
the service technician to perform safety
checks to determine that the equipment
is in safe operating order.

21. Do not install the equipment in the

following locations as this can cause a
fire or electric shock:

- Hot locations

- Close to a fire

- Very humid or dusty locations

- Locations exposed to direct sunlight

- Locations exposed to salt spray

- Close to flammable solvents (alcohol,

thinners, etc.)

22. When any of the following occurs,

immediately switch OFF the equipment,
unplug it from the main power supply
and contact your nearest Canon
supplier. Do not continue to use the
equipment as this can cause a fire or
electric shock.

- The equipment emits any smoke,

heat, abnormal noise, or unusual
odor.

- A metal object falls into the

equipment.

- The equipment is damaged in some

way.

23. Please observe the following when

using the equipment. Failure to do so
can result in a fire or electric shock.

- Do not use flammable sprays near

the equipment.

- Do not subject the equipment to

strong impacts.

24. Please observe the following when

handling the batteries. Failure to do so
can result in the batteries bursting or
emitting heat, sparks or corrosive fluid.

- Do not throw the batteries into a fire,

and do not heat, short-circuit or
attempt to disassemble the batteries.

- Do not attempt to recharge the

batteries.

- Do not use batteries other than those

specified for use with the equipment.

25. Please observe the following when

handling the batteries. Failure to do so
may result in the batteries bursting or
emitting heat, sparks or corrosive fluid.

- When the batteries are used up, or

when the equipment will not be used
for an extended period, remove the
batteries.

- When replacing the batteries, always

replace both batteries, and do not
use different types of batteries
together.

- Ensure that the + and – terminals are

correctly positioned when you load
the batteries.

- If any soiling or leakage of the

internal battery fluid occurs,
thoroughly clean the soiling or leaked
fluid with water.

This manual is related to the following products: