Canon VC-C50iR - Manual (Page 62)

24
Controlling the Camera from the Wireless Controller
3 2 1 AF
6 5 4 MF
9 8 7
0
MENU ID
HOME
Fn
BRIGHT
ON SCREEN
∞
SET/OK CANCEL
ZOOM
T
W
To fix the focus
Press the
n button.
■ This switches auto-focus off and fixes the focus.
To focus on nearby subjects
Press the
r button.
■ This enables switching the camera to manual focus mode
while moving the focal point closer to the camera.
■ Holding the button down moves the focal point closer to the
camera.
To focus on distant subjects
Press the
e button.
■ This enables switching the camera to manual focus mode
while moving the focal point further from the camera.
■ Holding the button down moves the focal point further away
from the camera.
■ At some zoom settings, the camera may not be able to focus
on the subject (
→ P.22).
Adjusting the Brightness
(BRIGHT)
This function brightens or darkens the image. When the camera is switched on, the brightness
is set to the Normal level.
3 2 1 AF
6 5 4 MF
9 8 7
0
MENU ID
HOME
Fn
BRIGHT
ON SCREEN
∞
SET/OK CANCEL
ZOOM
T
W
To brighten or darken the image
Press the
z side of the button to brighten the image and
the
x side to darken the image.
■ The image gradually brightens (or darkens) while the button
is held down.
■ The Normal brightness setting corresponds to setting [5] in
the AE REFERENCE screen (
→ P.32). The brightest setting
is [10] and the darkest setting is [1].
■ In particularly dark locations, it may not be possible to adjust
the brightness.
Darker Normal brightness Brighter