beautypg.com

Kenmore ASPIRADORA 116.29914 User Manual

Page 25

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

PROBLEM

POSSIBLE CAUSE

POSSIBLE SOLUTION

Constant green light on
in dirt sensor.

1. Dirt passage is dogged

2. Lenses are dirty

1 Check for dogs in air passages,
2, Clean lenses.

No green or red dirt
sensor lights.

1. Switch not in CARPET position,,

2. No power to sensor board.

1, Move switch to CARPET position
2- Take to your nearest Sears Service

Center,

CHECK BAG Indicator

activates,

1. Full or dogged dust bag

2. Dirty fiilers
3. Blocked airflow passage
4. Certain attachment tools

1, Change bag

2. Change fiiters
3. Clear blockage from airflow passage

4, This is norma! Light should go off

when tool is removed.

Vacuum cleaner picks

up moveable rugs "or*
PowerMate pushes too
hard.

1, Wror?g pile height setting

2. Suction too strong

1, Adjust setting.

2 Select lower Power Level

Red light for BELT
RESET {overload
protector) is lit on the
PowerMate,

1, Tripped overload protector in

PowerMate,

1. Remove any items that may be

caughlor jammed, then reset. If
vacuum cleaner starts and stops
again, dean agitator and end caps,
then reset

Cord won’t rewind.

1. Dirty power cord

2. Cord Jammed

1, Clean the power cord

2. Pul! out cord and rewind

Vacuum cleaner leaves

marks on carpet.

1. Wrong vacuuming pattern

1, See VACUUMING TIPS

25

This manual is related to the following products: