Powermate care, Warning, Belt changing and agitator cleaning – Kenmore ASPIRADORA 116.29914 User Manual
Page 19: To remove belt, Powermate® care
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
POWERMATE CARE
Always follow all safety precautions when performing maintenance to the PowerMate
.WARNING
Electrical Shock Or Personal Injury
Hazard
Always turn off and unplug vacuum
cleaner before performing maintenance
to the vacuum cleaner. Failure to do so
could result in electrical shock or
personal Injury from vacuum cleaner
suddenly starting.
J±i
BELT CHANGING AND AGITATOR CLEANING
TO REMOVE BELT
bJ
Wand
Quick
Release
Pedal
2.
Turn
PowerMate
upside down and
unscrew two (2)
PowerMate cover
screws.
1. Remove the
wand by pressing
the quick release
pedal and lifting
up on the wand.
Screws
3. Turn PowerMate
right side up,
4. Press handle
release pedal and
lower the swivel.
5. Lift rear latches
up
Rear
. Latches
Side
Latch
I
the side
'latches and pull
out.
7. Lift cover
upward from
back to remove.
8. Lift agitator
assembly out
remove worn belt
Base
End Cap
9. Check and clean end cap areas. See
AGITATOR ASSEMBLY for picture of
complete agitator assembly.
19